burnishing machine

ST 70

BURNISHING IS A FINISHING PROCESS FOR BEARING PIVOTS AND THEIR SHOULDERS OF WATCH AND INSTRUMENT GEARS.

APPLICATION

Burnishing is a finishing process for bearing pivots and their shoulders of watch and instrument gears. The workpiece lies with its two pivots which are to be burnished, in profiled notches of tungsten carbide flanges and is driven by a carrier in the correct rotational direction.

By means of two rotating, lapped, tungsten carbide discs, the machining process takes place, creating a burnished surface finish. The amount of stock removed depends on the size of the pivot diameter is between 0.005 and 0.01 mm and attains a surface finish of Ra 0,1 und 0,3 ?m (N3, N4). When using ceramic or degussit discs the machining method becomes a pure grinding process reaching greater stock removal.

PDF, 0.44 MB

CONTROL

The machine is equipped with a Siemens Simatic SPS control, which is remarkable for its reliability. The control, thanks to input masks, operator prompt and graphic display is very simple to use. The control needs a very short tuition time.

TECHNICAL DATA

Pivot diametermm0.1 - 8.00
Pivot length max.mm11.00
Shoulder distance, max.mm60.00
Workpiece length, max.mm80.00
Burnishing wheel diametermm72.00
Burnishing spindle speedrpm200 - 2'500
Workpiece speedrpm50 - 500
Space requirementmm900 x 800 x 1'800
Net weight approx.kg450

HAVE YOU ANY QUESTIONS? THEN PLEASE CONTACT US.

GEAR HOBBING MACHINES

GRINDING MACHINES

BURNISHING MACHINE

SPECIAL MACHINES

Strausak Mikroverzahnungen Ltd © 2018